#2 Forward: Both Forward Areas Fresh and Clean! 4 Free Balls
You get everything you need to make the forward of 1 side of
your Tornado Table ready
to go! So you replace the handles, the bumpers, the bearings, some pins
and you get FREE BALLS and SILICONE.
8 Bumpers: both bumpers on 5 row and 3 row, both sides.
4 Handles: 5 row and 3 row handles, all of them.
8 Bearings: near wall only by the handle (this is the heavy wear area), top and bottom, for 5 row and 3 row.
5 Pins: just in case.
FREE: Silicone: Lube me!
FREE
FREE: 4 Balls: 3 for now, 1 for later.
FREE
Regular Price $61.42, you save $15.25
This kit is for people who just want to practice passing and shooting. We have an excellent table maintenance section in the foosball university, check it out if you feel it might help. | |
You need fresh handles on the rods you shoot from. A new handle is tough on the hand so you need to get used to it. If you are using an older style of handle, you simply MUST GET THE NEW HANDLE! Keep your best handles for spares and be careful when you put on a new handle, they can splinter, use your punch to guide the pin in. (You do have a punch, right?) | |
You need to practice shooting and passing
with new fuzzy balls. They are slow, and stub, and hard to shoot
and sticky. But, if you practice with them, you will grow to LOVE
THEM.
HINT: Practice with 2 of them and save 1 for the last couple days so it is fresh! Clean you table and especially the bumpers to get the slime off the table to keep the balls clean longer. |
|
New bearings are not all that smoother then
old ones can be, but they act a certain way. If you need new rods
you better get them too. We are sending you bearings for the top
and bottom of the HANDLE side only. The far bearings are not that
important.
HINT: Save the best of the old ones and put them on the other rods. Test the bearings to put the best ones down and do not over tighten them. |
|
Bumpers are a must. People overlook
these to their pain. A new bumper is actually wider and much less
squishy. It will cause you to miss passes and you will also not
block the same way with new bumpers. They can also grab on dead
men shots.
HINT: Save the good old bumpers, chuck any broken ones. Never slide bumpers around on the rod, it ruins them, and gently clean your bumpers of excess lube. |
|
Pins: If you do not know why you need new, strong pins, you are going to have real trouble at a Foosball Major anyway so simply learn to enjoy the game because winning is not going to be your problem. Pins need to be strong, not squishy. You need to have the right feel to shoot crisp shots. |
PS: Yes, you could buy the kit for the discount on the parts, we don't mind!!! Don't bother asking for substitutions, this aint no Burger King!
#2 Forward: Both Forward Areas Fresh and Clean! 4 Free Balls
You get everything you need to make the forward of 1 side of
your Tornado Table ready
to go! So you replace the handles, the bumpers, the bearings, some pins
and you get FREE BALLS and SILICONE.
8 Bumpers: both bumpers on 5 row and 3 row, both sides.
4 Handles: 5 row and 3 row handles, all of them.
8 Bearings: near wall only by the handle (this is the heavy wear area), top and bottom, for 5 row and 3 row.
5 Pins: just in case.
FREE: Silicone: Lube me!
FREE
FREE: 4 Balls: 3 for now, 1 for later.
FREE
Regular Price $61.42, you save $15.25
This kit is for people who just want to practice passing and shooting. We have an excellent table maintenance section in the foosball university, check it out if you feel it might help. | |
You need fresh handles on the rods you shoot from. A new handle is tough on the hand so you need to get used to it. If you are using an older style of handle, you simply MUST GET THE NEW HANDLE! Keep your best handles for spares and be careful when you put on a new handle, they can splinter, use your punch to guide the pin in. (You do have a punch, right?) | |
You need to practice shooting and passing
with new fuzzy balls. They are slow, and stub, and hard to shoot
and sticky. But, if you practice with them, you will grow to LOVE
THEM.
HINT: Practice with 2 of them and save 1 for the last couple days so it is fresh! Clean you table and especially the bumpers to get the slime off the table to keep the balls clean longer. |
|
New bearings are not all that smoother then
old ones can be, but they act a certain way. If you need new rods
you better get them too. We are sending you bearings for the top
and bottom of the HANDLE side only. The far bearings are not that
important.
HINT: Save the best of the old ones and put them on the other rods. Test the bearings to put the best ones down and do not over tighten them. |
|
Bumpers are a must. People overlook
these to their pain. A new bumper is actually wider and much less
squishy. It will cause you to miss passes and you will also not
block the same way with new bumpers. They can also grab on dead
men shots.
HINT: Save the good old bumpers, chuck any broken ones. Never slide bumpers around on the rod, it ruins them, and gently clean your bumpers of excess lube. |
|
Pins: If you do not know why you need new, strong pins, you are going to have real trouble at a Foosball Major anyway so simply learn to enjoy the game because winning is not going to be your problem. Pins need to be strong, not squishy. You need to have the right feel to shoot crisp shots. |
PS: Yes, you could buy the kit for the discount on the parts, we don't mind!!! Don't bother asking for substitutions, this aint no Burger King!