Home > Foosball Parts > Parts by Product (balls, men, etc.) > Foosball Men > Tornado Foosball Man Counter Balanced

Tornado Foosball Man Counter Balanced


Foosball Men
Tornado Foosball Man Counter Balanced

Tornado Foosball Man Counter Balanced These men are made for Coin Ops, TP 2000, Cyclone II and Storm II tables. They are specially weighted and counter balanced for competitive play. You need a roll pin punch to replace.

The new design is on the new T3000 coin-op and and non coin-op commercial models. The 2009 home models still use the old design. These men have been discontinued.

Hint: Insert the roll pin with the teeth pointing up, towards the head, this helps to minimize roll pin breakage!
If men are too hard to put on, you can take a very fine sandpaper to slightly enlarge the holes.

NEW DESIGN??? new for 2009, the folks at Tornado tweaked the foot design. the 4 vertical edges/corners of the foot are sharper angles instead of rounded. Better chipping & banking is nice feature. If you look at the shooting/back-pinning surface of the foosman you'll see the textured surface riser higher on the foot providing a bit more texture for deep brushing passes & shots.


Player Dimensions: 1.3"D x 1.25"W x 4.3"H
Leg Width: 7/8" Hole Diameter: 9/16"


http://shop.foosball.comfts-110-010-01.html
$6.00
Tornado Foosball Man Counter Balanced
Item #:PT-ManCntrBal
$6.00
Color/Design:
Quantity:


Description

Tornado Foosball Man Counter Balanced These men are made for Coin Ops, TP 2000, Cyclone II and Storm II tables. They are specially weighted and counter balanced for competitive play. You need a roll pin punch to replace.

The new design is on the new T3000 coin-op and and non coin-op commercial models. The 2009 home models still use the old design. These men have been discontinued.

Hint: Insert the roll pin with the teeth pointing up, towards the head, this helps to minimize roll pin breakage!
If men are too hard to put on, you can take a very fine sandpaper to slightly enlarge the holes.

NEW DESIGN??? new for 2009, the folks at Tornado tweaked the foot design. the 4 vertical edges/corners of the foot are sharper angles instead of rounded. Better chipping & banking is nice feature. If you look at the shooting/back-pinning surface of the foosman you'll see the textured surface riser higher on the foot providing a bit more texture for deep brushing passes & shots.


Player Dimensions: 1.3"D x 1.25"W x 4.3"H
Leg Width: 7/8" Hole Diameter: 9/16"



Our Partners & Sponsors: ITSF USTSF Contact us regarding
partnerships or sponsorships
we accept Visa, Master Card, Discover, American Express, and PayPal
Copyright © 2022 www.foosball.com. All rights reserved. Yahoo! Store by Solid Cactus